PI6C2405A-1LE Overview
As a clock IC, PLLs is packaged using the Tube method. This clock generator is embedded in the 8-TSSOP (0.173, 4.40mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 8 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. TTL is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. This clock-based frequency generator provides a frequency up to 133MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage this clock generator would take is 3.6V. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. Clock PLL works with 3V~3.6V supply voltage provided. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. This electronic component can be classified as a Zero Delay Buffer. According to the base part number PI6C2405, its related parts can be found. There is an available 8 pin on the PLL. Electronic frequency generator can handle voltages up to 3.3V. This clock generator offers low timing skew at 0.2 ns Max. This digital clock generator is configured with 5 high true output enable pins. You can find similar electronic components by searching for the 6C family.
PI6C2405A-1LE Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
5 true outputs

PI6C2405A-1LE Applications
There are a lot of Diodes Incorporated
PI6C2405A-1LE Clock Generators applications.

Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks

Factory Lead Time	27 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
Published	2010
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Zero Delay Buffer
Terminal Finish	Matte Tin (Sn)
Voltage - Supply	3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	PI6C2405
Operating Supply Voltage	3.3V
Supply Voltage-Max (Vsup)	3.6V
Supply Voltage-Min (Vsup)	3V
Number of Circuits	1
Nominal Supply Current	54mA
Frequency (Max)	133MHz
Family	6C
Input	TTL
Ratio - Input:Output	1:5
PLL	Yes
Differential - Input:Output	No/No
Propagation Delay (tpd)	0.3 ns
Same Edge Skew-Max (tskwd)	0.2 ns
Number of True Outputs	5
Length	4.45mm
Width	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free