OPA4192IDR OverviewThe linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 14. Please take in mind that this instrumentation amplifier should be run at 3V. The buffer op amp includes 14 pins. Regarding input offset voltage, op amp rates 5μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp can operate from a supply current at 1mA. Voltage gain should remain at 140dB. There are 4 circuits on this op amp. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has.
OPA4192IDR Featuressupply voltage of 3V
140dB voltage gain
Output Type: Rail-to-Rail
OPA4192IDR ApplicationsThere are a lot of Texas Instruments
OPA4192IDR Instrumentational OP Amps applications.
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | OPA4192 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Operating Supply Current | 1mA |
| Supply Current-Max | 1.2mA |
| Slew Rate | 20V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 5μV |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 140dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Supply Voltage Limit-Max | 20V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867