OPA1632DR OverviewThere is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Audio-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 14mA . 78dB should be the voltage gain. A benefit of this op amp ic is that it outputs Differential signals, which is one of the many advantages it has to offer. There are 1 elements in total in this linear amplifier. For the packing of the instrumentation amplifier, TR is adopted.
OPA1632DR Features8 Pins
supply voltage of 15V
78dB voltage gain
Output Type: Differential
OPA1632DR ApplicationsThere are a lot of Texas Instruments
OPA1632DR Instrumentational OP Amps applications.
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 12 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Max Power Dissipation | 2W |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA1632 |
| Pin Count | 8 |
| Output Type | Differential |
| Number of Elements | 1 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 14mA |
| Output Current | 85mA |
| Slew Rate | 50V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 5V~32V ±2.5V~16V |
| Output Current per Channel | 85mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 180MHz |
| Gain Bandwidth Product | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 180000 kHz |
| Voltage Gain | 78dB |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Gain | 78 dB |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 180MHz |
| Input Offset Current-Max (IIO) | 0.5μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867