OP484FPZ OverviewIn the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 14 pins on it. Op amp rates 150μV as input offset voltage. For this electrical component, Through Hole is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 8mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 107.6dB for the time being. On the buffer amps, there are 4 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 28V. The linear amplifier is packaged by using a TAPE AND REEL axis. The current is quiescent at 2mA.
OP484FPZ Features14 Pins
supply voltage of 15V
107.6dB voltage gain
Output Type: Rail-to-Rail
OP484FPZ ApplicationsThere are a lot of Analog Devices Inc.
OP484FPZ Instrumentational OP Amps applications.
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OP484 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 28V |
| Power Supplies | +-1.5/+-18/3/36V |
| Number of Channels | 4 |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 6mA |
| Max Supply Current | 5.8mA |
| Quiescent Current | 2mA |
| Slew Rate | 4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 4.25MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4250 kHz |
| Voltage Gain | 107.6dB |
| Average Bias Current-Max (IIB) | 0.575μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 250μV |
| Settling Time | 4 μs |
| Dual Supply Voltage | 9V |
| Input Voltage Noise Density | 3.9nV/sqrt Hz |
| Height | 3.3mm |
| Length | 19.05mm |
| Width | 6.35mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP484FPZ Datasheet
+8613715157867