OMAP5910JZZG2 OverviewDue to its 289-TFBGA packaging, it is convenient to ship overseas. High reliability can be achieved by using the advanced packaging method Tray. Cores/Bus width of the CPU is 1 Core 32-Bit . Obtain a basic understanding of operating temperature around 0°C. From the OMAP-59xx series. ARM9TDMI is the processor core of this CPU. Memory controllers for this CPU are SDRAM. Featuring 1-Wire/HDQ, AC97, I2C, I2S, IrDA, McBSP, MCSI, MICROWIRE, MMC/SD, SPI, UART interfaces, this microprocessor can better serve you. There is 1.8V 2.75V 3.3V I/O running on this CPU. The type DIGITAL SIGNAL PROCESSOR, MIXED belongs to uPs/uCs/Peripheral ICs. OMAP5910 is a good way to search for variants of the microprocessor. Total terminations are 289. Using a 1.6V voltage supply, you should be able to operate the cpu microprocessor. 16-Bit is its architecture. A 150MHz frequency is used by the CPU. The datasheets for 289 pins provide details. To transfer data, there are 32b bandwidths available. Embedded microprocessor bodies have 289 pins injected into them. As a result of its Surface Mount mounting, this CPU is widely used in a wide variety of applications. From 1.6V onwards, the CPU microprocessor can operate. There is 1.675V voltage present in the CPU core. There is 160kB RAM (Random Access Memory) built in. There is 32kB memory on the CPU. The CPU's idle time can be determined by 6 counters. To program DMA (Direct Memory Access), 6 channels are used.
OMAP5910JZZG2 FeaturesARM9TDMI Core
16-Bit Structure
32b-Bit Data Bus Width
160kB RAM
OMAP5910JZZG2 ApplicationsThere are a lot of Texas Instruments
OMAP5910JZZG2 Microprocessor applications.
Robots
Radio
Television
Heater/Fan
Calculator
Kindle
Christmas lights
3D printers
Washing machine
Microwave ovens
| Factory Lead Time | 12 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 289-TFBGA |
| Number of Pins | 289 |
| Weight | 274.791928mg |
| Operating Temperature | -40°C~85°C TC |
| Packaging | Tray |
| Series | OMAP-59xx |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 289 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 150MHz |
| Base Part Number | OMAP5910 |
| Pin Count | 289 |
| Operating Supply Voltage | 1.6V |
| Voltage | 1.675V |
| Interface | I2C, MMC, SDIO, UART, USB |
| Memory Size | 32kB |
| Nominal Supply Current | 170mA |
| RAM Size | 160kB |
| Memory Type | FLASH |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, MIXED |
| Core Processor | ARM9TDMI |
| Bit Size | 16 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 6 |
| Address Bus Width | 25 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.75V 3.3V |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 2.0 (2) |
| Additional Interfaces | 1-Wire/HDQ, AC97, I2C, I2S, IrDA, McBSP, MCSI, MICROWIRE, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C55x, System Control; CP15 |
| ROM Programmability | MROM |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Display & Interface Controllers | Keypad, LCD |
| Number of DMA Channels | 6 |
| Length | 12mm |
| Height Seated (Max) | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OMAP5910JZZG2 Datasheet
+8613715157867