MC100LVEP34DT OverviewThe Tube method is used for packaging clock ICs. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 16 terminations found in this file. To operate this time clock generator, 2.5V voltage should be applied. In this clock generator, CML, LVDS, NECL, PECL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 2.8GHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. 3.8V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 2.375V. In terms of supply voltage, RF synthesizer works with 2.375V~3.8V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of ECL logic. It has been classified as a Clock Generator electronic part, which means that it is a semiconductor. It is a 16-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number MC100LVEP34. There are 16 pins on the frequency generators that are available for use. 100LVEP series electronic parts are used in this part. Low timing skew is offered by this RF synthesizer at maximum 0.035 ns.
MC100LVEP34DT FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
MC100LVEP34DT ApplicationsThere are a lot of ON Semiconductor
MC100LVEP34DT Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
Number of Pins | 16 |
Operating Temperature | -40°C~85°C |
Packaging | Tube |
Series | 100LVEP |
Published | 2007 |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Obsolete |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 16 |
ECCN Code | EAR99 |
Type | Clock Generator |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Voltage - Supply | 2.375V~3.8V |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 2.5V |
Terminal Pitch | 0.65mm |
Time@Peak Reflow Temperature-Max (s) | 40 |
Base Part Number | MC100LVEP34 |
Output | ECL |
Pin Count | 16 |
Supply Voltage-Max (Vsup) | 3.8V |
Power Supplies | +-2.375/+-3.8V |
Supply Voltage-Min (Vsup) | 2.375V |
Number of Circuits | 1 |
Frequency (Max) | 2.8GHz |
Input | CML, LVDS, NECL, PECL |
Ratio - Input:Output | 1:3 |
PLL | No |
Differential - Input:Output | Yes/Yes |
Prop. Delay@Nom-Sup | 0.85 ns |
Propagation Delay (tpd) | 0.8 ns |
Divider/Multiplier | Yes/No |
fmax-Min | 2800 MHz |
Same Edge Skew-Max (tskwd) | 0.035 ns |
Length | 5mm |
Width | 4.4mm |
RoHS Status | Non-RoHS Compliant |
Lead Free | Lead Free |