LMH6554LEE/NOPB OverviewThe linear amplifier is packaged in a 14-UFQFN case. This is a Current Feedback type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins. Please take in mind that this instrumentation amplifier should be run at 2.5V. The buffer op amp includes 14 pins. Regarding input offset voltage, op amp rates 16mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp can operate from a supply current at 52mA. It is a member of the 0dB's 0dB family. The op amp ic has 1 channels on it. This op amp ic outputs Differential signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 5V. TR is adopted to pack the instrumentation amplifier. Instrumentation amplifier resistance should remain within the range of 180kOhm.
LMH6554LEE/NOPB Features14 Pins
supply voltage of 2.5V
0dB voltage gain
Output Type: Differential
Resistance of 180kOhm
LMH6554LEE/NOPB ApplicationsThere are a lot of Texas Instruments
LMH6554LEE/NOPB Instrumentational OP Amps applications.
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-UFQFN |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 180kOhm |
| Packing Method | TR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LMH6554 |
| Pin Count | 14 |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 52mA |
| Nominal Supply Current | 52mA |
| Output Current | 90mA |
| Max Supply Current | 60mA |
| Slew Rate | 6200V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 83 dB |
| Current - Input Bias | 1μA |
| Voltage - Supply, Single/Dual (±) | 4.7V~5.25V |
| Output Current per Channel | 150mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 16mV |
| Bandwidth | 2.8 GHz |
| Gain Bandwidth Product | 500MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 2500000 kHz |
| Voltage Gain | 0dB |
| Average Bias Current-Max (IIB) | 8μA |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 6.5mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 1500MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 2.5V |
| Height | 600μm |
| Length | 2.5mm |
| Width | 2.5mm |
| Thickness | 600μm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6554LEE/NOPB Datasheet
+8613715157867