CY7B993V-5AXC Overview
Tray-method packaging is used for clock ICs. The 100-LQFP package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 100 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be LVPECL, LVTTL. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 100MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.63V. For safety reasons, this frequency synthesizer should have a voltage supply above 2.97V. As far as the supply voltage is concerned, clock PLL can be used with 2.97V~3.63V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. As the name suggests, this is a clock generator that is compatible with LVTTL logic levels. This electronic component is usually classified as a Clock Buffer, Fanout Distribution component. The clock-generating IC is a 100-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CY7B993. It is possible to connect to the PLL via 100 pins. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. This clock PLL features CONFIGURABLE AS SINGLE ENDED TTL ALSO for better clock signal output. The RoboClock™ series includes this electronic part. 18 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.5 ns Max, this clock generator offers low timing skew. When searching for parts of the 7B family, similar electronic components will be found.
CY7B993V-5AXC Features
Available in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY7B993V-5AXC Applications
There are a lot of Cypress Semiconductor Corp
CY7B993V-5AXC Clock Generators applications.

Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange

Factory Lead Time	11 Weeks
Contact Plating	Gold, Tin
Mounting Type	Surface Mount
Package / Case	100-LQFP
Surface Mount	YES
Number of Pins	100
Operating Temperature	0°C~70°C
Packaging	Tray
Series	RoboClock™
Published	2003
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	100
ECCN Code	EAR99
Type	Clock Buffer, Fanout Distribution
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	CONFIGURABLE AS SINGLE ENDED TTL ALSO
Voltage - Supply	2.97V~3.63V
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	CY7B993
Output	LVTTL
Pin Count	100
Number of Outputs	18
Operating Supply Voltage	3.3V
Supply Voltage-Max (Vsup)	3.63V
Supply Voltage-Min (Vsup)	2.97V
Number of Circuits	1
Nominal Supply Current	250mA
Frequency (Max)	100MHz
Family	7B
Input	LVPECL, LVTTL
Ratio - Input:Output	4:18
Max I(ol)	0.002 A
PLL	Yes
Differential - Input:Output	No/No
Prop. Delay@Nom-Sup	0.5 ns
Propagation Delay (tpd)	0.5 ns
Divider/Multiplier	Yes/Yes
Same Edge Skew-Max (tskwd)	0.5 ns
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free