CY2300SXCT OverviewAs a clock IC, it uses the Tape & Reel (TR) package. 8-SOIC (0.154, 3.90mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 8 terminations. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by LVCMOS, LVTTL as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 166.67MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. For safety reasons, this frequency generator's supply voltage should remain above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at 0°C~70°C. I would like to present to you a frequency synthesizer that is compatible with LVCMOS logic levels. This is an electronic part that can be classified as a Clock Multiplier, Fanout Distribution in this case. In particular, this clock PLL is designed to be used with microprocessors. CY2300 is the base part number for finding related electronic parts. There is a 8 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3.3V. 4 signal outputs allow for maximi4ation of output frequency. At 0.2 ns Max, this analog clock generator exhibits low timing skew.
CY2300SXCT FeaturesAvailable in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2300SXCT ApplicationsThere are a lot of Cypress Semiconductor Corp
CY2300SXCT Clock Generators applications.
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
| Factory Lead Time | 15 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Clock Multiplier, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2300 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 166.67MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:4 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.2 ns |
| Propagation Delay (tpd) | 0.2 ns |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2300SXCT Datasheet
+8613715157867