CDCVF857DGGG4 Overview
In order to package it as a clock IC, the Tube package is used. A Clock PLL is included with the 48-TFSOP (0.240, 6.10mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result of this, we can find 48 terminations. Clock generator ics require a voltage of 2.5V. As the Clock PLL's input, SSTL-2 is designed to be used in order to generate the clock signal. It is possible to access the full performance of the electrical part by implementing 1 circuits. Surface Mount-slots make it easy to mount this electronic component on panels. It would take a maximum supply voltage of 2.7V to operate this time clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.3V. Clock generator ic works with 2.3V~2.7V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. PLL Clock Driver is the type of electrical part that this component is classified as. It is a 48-bit IC that is designed for microprocessors specifically. Related electrical parts can be found for the base part number CDCVF857. The clock PLL has 48 pins that are available. In terms of the supply voltage, PLL clock can handle 2.5V volts. The frequency synthesizer features 10 signal outputs to ensure as high a frequency as possible. As a result of this digital clock generator, there is a low timing skew at 0.04 ns max. By searching for the 857 family, it is possible to find similar electrical components. At frequencies of 220MHz, RF synthesizer achieves high efficiency. In this operation, a maximum current of 10mA is supplied to the clock generator.
CDCVF857DGGG4 Features
Available in the 48-TFSOP (0.240, 6.10mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V

CDCVF857DGGG4 Applications
There are a lot of Texas Instruments
CDCVF857DGGG4 Clock Generators applications.

10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
Media broadcast servers
Test equipment

Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Factory Lead Time	6 Weeks
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-TFSOP (0.240, 6.10mm Width)
Number of Pins	48
Weight	223.195796mg
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	48
Type	PLL Clock Driver
Voltage - Supply	2.3V~2.7V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Frequency	220MHz
Base Part Number	CDCVF857
Pin Count	48
Number of Outputs	10
Operating Supply Voltage	2.5V
Supply Voltage-Max (Vsup)	2.7V
Supply Voltage-Min (Vsup)	2.3V
Number of Circuits	1
Nominal Supply Current	10mA
Max Supply Current	10mA
Family	857
Output Characteristics	3-STATE
Input	SSTL-2
Ratio - Input:Output	2:11
PLL	Yes with Bypass
Differential - Input:Output	Yes/Yes
Propagation Delay (tpd)	3.5 ns
Divider/Multiplier	No/No
Same Edge Skew-Max (tskwd)	0.04 ns
Height	1.2mm
Length	12.5mm
Width	6.1mm
Thickness	1.15mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free