CDCV857BDGGR Overview
As a clock IC, it uses the Tape & Reel (TR) package. 48-TFSOP (0.240, 6.10mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 48 terminations. For this clock generator ic, a voltage of 2.5V is required. This Clock PLL will be fed by Clock as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 2.7V of power. For safety reasons, this frequency generator's supply voltage should remain above 2.3V. There are 2.3V~2.7V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at 0°C~85°C. This is an electronic part that can be classified as a PLL Clock Driver in this case. In particular, this clock PLL is designed to be used with microprocessors. CDCV857 is the base part number for finding related electronic parts. There is a 48 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 2.5V. 10 signal outputs allow for maximi10ation of output frequency. The 857 family of parts can be used to find electric parts that are similar to each other. At a frequency of 200MHz, the system can achieve high efficiency. This electronic frequency generator is well suited to the TR package.
CDCV857BDGGR Features
Available in the 48-TFSOP (0.240, 6.10mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V

CDCV857BDGGR Applications
There are a lot of Texas Instruments
CDCV857BDGGR Clock Generators applications.

Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers

Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-TFSOP (0.240, 6.10mm Width)
Number of Pins	48
Weight	223.195796mg
Operating Temperature	0°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	48
Type	PLL Clock Driver
Packing Method	TR
Voltage - Supply	2.3V~2.7V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Frequency	200MHz
Base Part Number	CDCV857
Pin Count	48
Number of Outputs	10
Operating Supply Voltage	2.5V
Supply Voltage-Max (Vsup)	2.7V
Supply Voltage-Min (Vsup)	2.3V
Number of Circuits	1
Nominal Supply Current	12mA
Family	857
Output Characteristics	3-STATE
Input	Clock
Ratio - Input:Output	1:10
PLL	Yes with Bypass
Differential - Input:Output	Yes/Yes
Divider/Multiplier	No/No
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free