AM1705CPTP3 OverviewShipping overseas is convenient thanks to the embedded microprocessor's packaging in 176-LQFP Exposed Pad. High reliability is achieved using advanced packaging method Tray. 1 Core 32-Bit cores/Bus width are present in the CPU. Identify the operating temperature around 0°C~90°C TJ. In the Sitara™ series, it is found. The CPU is cored by a processor with a number of 0 cores. A total of SDRAM RAM controllers are used by this CPU. The microprocessor features interfaces I2C, McASP, SPI, MMC/SD, UART for better service. At 1.8V 3.3V, the CPU runs its I/O. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. Search AM1705 for variants of the embedded microprocessor. In total, 176 terminations have been made. Using a 1.2V voltage supply, the microprocessor should turn on and run. It is an architecture with 32 bits. CPUs operate with a frequency of 375MHz Hz. You can refer to the datasheets for the functions of 176 pins. It is important to note that there is 32b bandwidth available for data transfer. This CPU is widely used in many applications because of its Surface Mount mount. From 1.2V on, the CPU microprocessor will function. It is 1.32V on the CPU's core. In general, RAM (Random-Access Memory) is designed with a 8kB of 0MB. normally, the microprocessor should not receive a voltage higher than 1.32V. The lowest voltage that should be applied to the micro processor is 1.14V. A CPU is equipped with a 16kB sized memory. It features 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
AM1705CPTP3 FeaturesARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
AM1705CPTP3 ApplicationsThere are a lot of Texas Instruments
AM1705CPTP3 Microprocessor applications.
Television
Heater/Fan
Calculator
Kindle
Christmas lights
3D printers
Washing machine
Microwave ovens
Home appliances
Home video and audio
Contact Plating | Gold |
Mount | Surface Mount |
Package / Case | 176-LQFP Exposed Pad |
Number of Pins | 176 |
Operating Temperature | 0°C~90°C TJ |
Packaging | Tray |
Series | Sitara™ |
JESD-609 Code | e4 |
Pbfree Code | no |
Part Status | Obsolete |
Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
Number of Terminations | 176 |
Terminal Position | QUAD |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Supply Voltage | 1.2V |
Terminal Pitch | 0.5mm |
Frequency | 375MHz |
Base Part Number | AM1705 |
Operating Supply Voltage | 1.2V |
Voltage | 1.32V |
Interface | SPI, USB |
Max Supply Voltage | 1.32V |
Min Supply Voltage | 1.14V |
Memory Size | 16kB |
RAM Size | 8kB |
uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
Core Processor | ARM926EJ-S |
Bit Size | 32 |
Data Bus Width | 32b |
Address Bus Width | 13 |
Core Architecture | ARM |
Boundary Scan | YES |
Low Power Mode | YES |
Format | FIXED POINT |
Integrated Cache | YES |
Voltage - I/O | 1.8V 3.3V |
Number of UART Channels | 3 |
Ethernet | 10/100Mbps (1) |
Number of Cores/Bus Width | 1 Core 32-Bit |
Graphics Acceleration | No |
RAM Controllers | SDRAM |
USB | USB 2.0 + PHY (1) |
Additional Interfaces | I2C, McASP, SPI, MMC/SD, UART |
Co-Processors/DSP | System Control; CP15 |
Length | 24mm |
Height Seated (Max) | 1.6mm |
RoHS Status | ROHS3 Compliant |
Lead Free | Contains Lead |