AD8271ARMZ OverviewPackaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp ic of the Programmable Gain type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 10. The pins on this board total to 10 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 10 pins are present on the instrumentation amplifier. There is an input offset voltage of 600μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 2.6mA, this op amp ic can operate. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 18V. Instrumentation amplifier resistance should stay within the range of 10kOhm.
AD8271ARMZ Features10 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 10kOhm
AD8271ARMZ ApplicationsThere are a lot of Analog Devices Inc.
AD8271ARMZ Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 10kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8271 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 2.6mA |
| Nominal Supply Current | 2.3mA |
| Max Supply Current | 3.2mA |
| Min Input Voltage | 2.5V |
| Slew Rate | 30V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 500nA |
| Max Input Voltage | 18V |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 15MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 113.98dB |
| Voltage - Input Offset | 300μV |
| Settling Time | 700 ns |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8271ARMZ Datasheet
+8613715157867